dmesg - stress on cpu
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-25-generic (buildd@lgw01-20) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #26~14.04.1-Ubuntu SMP Fri Jul 24 21:16:20 UTC 2015 (Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2)
Command line: BOOT_IMAGE=/vmlinuz-3.19.0-25-generic root=/dev/mapper/dfernandes--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007f378fff] usable
BIOS-e820: [mem 0x000000007f379000-0x000000007f38efff] reserved
BIOS-e820: [mem 0x000000007f38f000-0x000000007f3cdfff] ACPI data
BIOS-e820: [mem 0x000000007f3ce000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000c7fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. PowerEdge M610/0N582M, BIOS 6.4.0 07/18/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0xc80000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CFFFF write-back
D0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0100000000 mask FF00000000 write-back
2 base 0200000000 mask FE00000000 write-back
3 base 0400000000 mask FC00000000 write-back
4 base 0800000000 mask FC00000000 write-back
5 base 0C00000000 mask FF80000000 write-back
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f379 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8800000fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0xc7fe00000-0xc7fffffff]
[mem 0xc7fe00000-0xc7fffffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0xc60000000-0xc7fdfffff]
[mem 0xc60000000-0xc7fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7f378fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7f1fffff] page 2M
[mem 0x7f200000-0x7f378fff] page 4k
init_memory_mapping: [mem 0x100000000-0xc5fffffff]
[mem 0x100000000-0xc5fffffff] page 2M
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
RAMDISK: [mem 0x3585a000-0x36c24fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F1830 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F1934 00009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x000000007F3B3F9C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x000000007F38F000 003A37 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 0x000000007F3B6000 000040
ACPI: APIC 0x000000007F3B3478 00015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x000000007F3B35D8 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x000000007F3B362C 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 0x000000007F3B3668 0001B8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x000000007F3B38C4 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 0x000000007F3B3904 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x000000007F3B3A3C 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x000000007F392BD8 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x000000007F392E48 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x000000007F392A38 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x000000007F392A68 000170 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 0x000000007F3B3BC0 000370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x000000007F3B3F34 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 0x000000007F3B7000 0043F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0x10 -> Node 0
SRAT: PXM 2 -> APIC 0x00 -> Node 1
SRAT: PXM 1 -> APIC 0x12 -> Node 0
SRAT: PXM 2 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 0
SRAT: PXM 2 -> APIC 0x04 -> Node 1
SRAT: PXM 1 -> APIC 0x16 -> Node 0
SRAT: PXM 2 -> APIC 0x06 -> Node 1
SRAT: PXM 1 -> APIC 0x11 -> Node 0
SRAT: PXM 2 -> APIC 0x01 -> Node 1
SRAT: PXM 1 -> APIC 0x13 -> Node 0
SRAT: PXM 2 -> APIC 0x03 -> Node 1
SRAT: PXM 1 -> APIC 0x15 -> Node 0
SRAT: PXM 2 -> APIC 0x05 -> Node 1
SRAT: PXM 1 -> APIC 0x17 -> Node 0
SRAT: PXM 2 -> APIC 0x07 -> Node 1
SRAT: Node 1 PXM 2 [mem 0x00000000-0x7fffffff]
SRAT: Node 1 PXM 2 [mem 0x100000000-0x67fffffff]
SRAT: Node 0 PXM 1 [mem 0x680000000-0xc7fffffff]
NUMA: Node 1 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x67fffffff] -> [mem 0x00000000-0x67fffffff]
NODE_DATA(0) allocated [mem 0xc7ffce000-0xc7ffd2fff]
NODE_DATA(1) allocated [mem 0x67fffb000-0x67fffffff]
[ffffea0000000000-ffffea0019ffffff] PMD -> [ffff880667e00000-ffff88067fdfffff] on node 1
[ffffea001a000000-ffffea0031ffffff] PMD -> [ffff880c67600000-ffff880c7f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0xc7fffffff]
Movable zone start for each node
Early memory node ranges
node 1: [mem 0x00001000-0x0009dfff]
node 1: [mem 0x00100000-0x7f378fff]
node 1: [mem 0x100000000-0x67fffffff]
node 0: [mem 0x680000000-0xc7fffffff]
Initmem setup node 0 [mem 0x680000000-0xc7fffffff]
On node 0 totalpages: 6291456
Normal zone: 98304 pages used for memmap
Normal zone: 6291456 pages, LIFO batch:31
Initmem setup node 1 [mem 0x00001000-0x67fffffff]
On node 1 totalpages: 6288150
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8078 pages used for memmap
DMA32 zone: 516985 pages, LIFO batch:31
Normal zone: 90112 pages used for memmap
Normal zone: 5767168 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
PM: Registered nosave memory: [mem 0x7f379000-0x7f38efff]
PM: Registered nosave memory: [mem 0x7f38f000-0x7f3cdfff]
PM: Registered nosave memory: [mem 0x7f3ce000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880667c00000 s86144 r8192 d32640 u131072
pcpu-alloc: s86144 r8192 d32640 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Node order, mobility grouping on. Total pages: 12383027
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-25-generic root=/dev/mapper/dfernandes--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 49424808K/50318424K available (7918K kernel code, 1172K rwdata, 3752K rodata, 1408K init, 1292K bss, 893616K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS:16640 nr_irqs:1224 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
Console: colour dummy device 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.059 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.11 BogoMIPS (lpj=9576236)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 29988 entries in 118 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000fed90000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020f6
dmar: RMRR base: 0x0000007f4c8000 end: 0x0000007f4dffff
dmar: RMRR base: 0x0000007f4b1000 end: 0x0000007f4bffff
dmar: RMRR base: 0x0000007f4a1000 end: 0x0000007f4a1fff
dmar: RMRR base: 0x0000007f4a3000 end: 0x0000007f4a3fff
dmar: RMRR base: 0x0000007f4a5000 end: 0x0000007f4a5fff
dmar: RMRR base: 0x0000007f4a7000 end: 0x0000007f4a7fff
dmar: RMRR base: 0x0000007f4a9000 end: 0x0000007f4a9fff
dmar: RMRR base: 0x0000007f4c0000 end: 0x0000007f4c0fff
dmar: RMRR base: 0x0000007f4c2000 end: 0x0000007f4c2fff
dmar: ATSR flags: 0x0
This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (fam: 06, model: 1a, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
perf_event_intel: CPU erratum AAJ80 worked around
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #1, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #2
.... node #1, CPUs: #3
.... node #0, CPUs: #4
.... node #1, CPUs: #5
.... node #0, CPUs: #6
.... node #1, CPUs: #7
.... node #0, CPUs: #8
.... node #1, CPUs: #9
.... node #0, CPUs: #10
.... node #1, CPUs: #11
.... node #0, CPUs: #12
.... node #1, CPUs: #13
.... node #0, CPUs: #14
.... node #1, CPUs: #15
x86: Booted up 2 nodes, 16 CPUs
smpboot: Total of 16 processors activated (76607.89 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
pinctrl core: initialized pinctrl subsystem
RTC time: 15:30:34, date: 01/11/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:3403] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [8086:340f] type 01 class 0x060400
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:3410] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xe8c0-0xe8df]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xe8e0-0xe8ff]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xdf2ff800-0xdf2ffbff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xec00-0xec1f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xec20-0xec3f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xec40-0xec5f]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xdf2ffc00-0xdf2fffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI PM1a_EVT_BLK [io 0x0800-0x0803]
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xece0-0xece7]
pci 0000:00:1f.5: reg 0x14: [io 0xecf8-0xecfb]
pci 0000:00:1f.5: reg 0x18: [io 0xece8-0xecef]
pci 0000:00:1f.5: reg 0x1c: [io 0xecfc-0xecff]
pci 0000:00:1f.5: reg 0x20: [io 0xecb0-0xecbf]
pci 0000:00:1f.5: reg 0x24: [io 0xecc0-0xeccf]
pci 0000:01:00.0: [14e4:163a] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xd4000000-0xd5ffffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [14e4:163a] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0xd6000000-0xd7ffffff 64bit]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff]
pci 0000:03:00.0: [14e4:163a] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xddff0000-0xddffffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:163a] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:03:00.1: reg 0x30: [mem 0xddff0000-0xddffffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xd8000000-0xddffffff]
pci 0000:00:08.0: PCI bridge to [bus 04]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:02:00.0: [1000:0058] type 00 class 0x010000
pci 0000:02:00.0: reg 0x10: [io 0xfc00-0xfcff]
pci 0000:02:00.0: reg 0x14: [mem 0xdf1fc000-0xdf1fffff 64bit]
pci 0000:02:00.0: reg 0x1c: [mem 0xdf1e0000-0xdf1effff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xdf000000-0xdf0fffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf1fffff]
pci 0000:06:03.0: [102b:0532] type 00 class 0x030000
pci 0000:06:03.0: reg 0x10: [mem 0xd3800000-0xd3ffffff pref]
pci 0000:06:03.0: reg 0x14: [mem 0xdeffc000-0xdeffffff]
pci 0000:06:03.0: reg 0x18: [mem 0xde000000-0xde7fffff]
pci 0000:06:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd3800000-0xd3ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 *4 5 6 7 10 11 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:06:03.0
vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f379000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (disabled)
system 00:03: [io 0x0800-0x087f] could not be reserved
system 00:03: [io 0x0880-0x08ff] could not be reserved
system 00:03: [io 0x0900-0x091f] has been reserved
system 00:03: [io 0x0920-0x0923] has been reserved
system 00:03: [io 0x0924] has been reserved
system 00:03: [io 0x0ca0-0x0ca7] has been reserved
system 00:03: [io 0x0ca9-0x0cab] has been reserved
system 00:03: [io 0x0cad-0x0caf] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:04: [irq 0 disabled]
system 00:04: [io 0x0ca8] has been reserved
system 00:04: [io 0x0cac] has been reserved
system 00:04: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed90000-0xfed91fff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:03:00.1: can't claim BAR 6 [mem 0xddff0000-0xddffffff pref]: address conflict with 0000:03:00.0 [mem 0xddff0000-0xddffffff pref]
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff]
pci 0000:03:00.1: BAR 6: assigned [mem 0xdc000000-0xdc00ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xd8000000-0xddffffff]
pci 0000:00:08.0: PCI bridge to [bus 04]
pci 0000:00:09.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xf000-0xffff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf1fffff]
pci 0000:06:03.0: BAR 6: assigned [mem 0xde800000-0xde80ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 06]
pci 0000:00:1e.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge window [mem 0xd3800000-0xd3ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:01: resource 1 [mem 0xd4000000-0xd7ffffff]
pci_bus 0000:03: resource 1 [mem 0xd8000000-0xddffffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf1fffff]
pci_bus 0000:06: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:06: resource 2 [mem 0xd3800000-0xd3ffffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x80000000-0xfdffffff]
pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:06:03.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20268K (ffff88003585a000 - ffff880036c25000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7b379000-0x7f379000] (64MB) mapped at [ffff88007b379000-ffff88007f378fff]
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU8 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU9 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU10 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU11 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU12 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU13 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU14 sig=0x106a5, pf=0x1, revision=0x19
microcode: CPU15 sig=0x106a5, pf=0x1, revision=0x19
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1452526234.824:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:08.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:08.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd3800000, mapped to 0xffffc90016a80000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
serial 00:02: [io 0x03f8-0x03ff]
serial 00:02: [irq 4]
serial 00:02: activated
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.5: version 2.13
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xece0 ctl 0xecf8 bmdma 0xecb0 irq 17
ata2: SATA max UDMA/133 cmd 0xece8 ctl 0xecfc bmdma 0xecb8 irq 17
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf2ff800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf2ffc00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-25-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000e8c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-25-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e8e0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-25-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
tsc: Refined TSC clocksource calibration: 2393.992 MHz
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.0-25-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ec20
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.19.0-25-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ec40
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.19.0-25-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 5-2: new full-speed USB device number 2 using uhci_hcd
usb 6-2: new low-speed USB device number 2 using uhci_hcd
usb 5-2: New USB device found, idVendor=046b, idProduct=ff10
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: Virtual Keyboard and Mouse
usb 5-2: Manufacturer: American Megatrends Inc.
usb 5-2: SerialNumber: serial
usb 6-2: New USB device found, idVendor=0624, idProduct=de11
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Avocent KVM
usb 6-2: Manufacturer: Avocent
i8042: No controller found
Switched to clocksource tsc
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6aaa11d18c2d3a40b1b4dbe5bf8ad656ddf51838'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:862:537
bdi 1:15: hash matches
tty ttyS17: hash matches
rtc_cmos 00:01: setting system clock to 2016-01-11 15:30:37 UTC (1452526237)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 344K (ffff880001baa000 - ffff880001c00000)
systemd-udevd[228]: starting version 204
bnx2: QLogic NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.5 (December 20, 2013)
bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5709 1000Base-SX (C0) PCI Express found at mem d4000000, IRQ 30, node addr e0:db:55:2f:9f:b0
bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5709 1000Base-SX (C0) PCI Express found at mem d6000000, IRQ 31, node addr e0:db:55:2f:9f:b2
bnx2 0000:03:00.0 eth2: Broadcom NetXtreme II BCM5709 1000Base-SX (C0) PCI Express found at mem d8000000, IRQ 32, node addr e0:db:55:2f:9f:b4
hidraw: raw HID events driver (C) Jiri Kosina
bnx2 0000:03:00.1 eth3: Broadcom NetXtreme II BCM5709 1000Base-SX (C0) PCI Express found at mem da000000, IRQ 33, node addr e0:db:55:2f:9f:b6
bnx2 0000:01:00.0 em1: renamed from eth0
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:046B:FF10.0001/input/input1
hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-2/input0
systemd-udevd[230]: renamed network interface eth0 to em1
bnx2 0000:01:00.1 em2: renamed from eth1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:046B:FF10.0002/input/input2
hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-2/input1
input: Avocent Avocent KVM as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/0003:0624:DE11.0003/input/input3
systemd-udevd[231]: renamed network interface eth1 to em2
bnx2 0000:03:00.0 p3p1: renamed from eth2
systemd-udevd[236]: renamed network interface eth2 to p3p1
bnx2 0000:03:00.1 p3p2: renamed from eth3
hid-generic 0003:0624:DE11.0003: input,hidraw2: USB HID v1.10 Keyboard [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input0
input: Avocent Avocent KVM as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/0003:0624:DE11.0004/input/input4
hid-generic 0003:0624:DE11.0004: input,hidraw3: USB HID v1.10 Mouse [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input1
systemd-udevd[233]: renamed network interface eth3 to p3p2
ioc0: LSISAS1068E B3: Capabilities={Initiator}
scsi host2: ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=16
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 9, phy 0, sas_addr 0x5000c5003bd77601
scsi 2:0:0:0: Direct-Access SEAGATE ST9146803SS FS66 PQ: 0 ANSI: 5
random: lvm urandom read with 70 bits of entropy available
scsi 2:0:0:0: Attached scsi generic sg0 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c50031dad2d5
scsi 2:0:1:0: Direct-Access SEAGATE ST9146803SS FS65 PQ: 0 ANSI: 5
scsi 2:0:1:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching raid volume, channel 1, id 0
scsi 2:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
sd 2:1:0:0: Attached scsi generic sg2 type 0
sd 2:1:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
sd 2:1:0:0: [sda] Write Protect is off
sd 2:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 2:1:0:0: [sda] No Caching mode page found
sd 2:1:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 < sda5 >
sd 2:1:0:0: [sda] Attached SCSI disk
random: nonblocking pool is initialized
EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
EXT4-fs (dm-0): write access will be enabled during recovery
EXT4-fs (dm-0): orphan cleanup on readonly fs
EXT4-fs (dm-0): 4 orphan inodes deleted
EXT4-fs (dm-0): recovery complete
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
ERST: NVRAM ERST Log Address Range not implemented yet.
Adding 50315260k swap on /dev/mapper/dfernandes--vg-swap_1. Priority:-1 extents:1 across:50315260k FS
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-udevd[498]: starting version 204
lp: driver loaded but no devices found
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
ipmi message handler version 39.2
ACPI Error: No handler for Region [IPMI] (ffff880c670a3240) [IPMI] (20141107/evregion-163)
ACPI Error: Region IPMI (ID=7) has no handler (20141107/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff880c670a2b18), AE_NOT_EXIST (20141107/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff880c670a2a78), AE_NOT_EXIST (20141107/psparse-536)
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20141107/power_meter-755)
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
EDAC MC: Ver: 3.0.0
EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (POLLED)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
wmi: Mapper loaded
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0xaabb, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
gpio_ich: GPIO from 451 to 511 on gpio_ich
ipmi device interface
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
IPMI SSIF Interface driver
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
audit: type=1400 audit(1452526277.480:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=624 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=619 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=619 comm="apparmor_parser"
audit: type=1400 audit(1452526277.480:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=619 comm="apparmor_parser"
bnx2 0000:01:00.0 em1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
bnx2 0000:01:00.0 em1: NIC SerDes Link is Up, 1000 Mbps full duplex
, receive & transmit flow control ON
IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
init: failsafe main process (706) killed by TERM signal
init: plymouth-upstart-bridge main process ended, respawning
init: tty1 main process ended, respawning
init: tty1 main process ended, respawning
perf interrupt took too long (2727 > 2500), lowering kernel.perf_event_max_sample_rate to 50000